Unleaded Kit-Cylinder Head

B510D
Required Qty 1
ex Shipping gms
Add to cart
Request a quote
  • Description
  • More

  • TF 1500

To convert your cylinder head:

  • Strip the cylinder head of all components. Have the head U.V checked for any cracks and then clean in caustic soda.
  • After washing off the caustic solution in a hot wash tank, dry the head and grit blast to remove any remaining carbon and to clean the waterways.
  • Fit the Manganese silicon bronze valve guides and ream to size. (Bronze removes heat two and a half times faster than original cast iron valve guides).
  • Machine the exhaust seats and fit the lead free compatible seat inserts.
  • Cut the valve seats using three angles, (15, 30 & 45 degree). This aids the flow and increases B.H.P. for use with premium lead-free fuel.
  • Blend the throat valves to remove any sharp edges caused by fitting the inserts and cutting the seats.
  • The head may need skimming to ensure the face is flat.
  • After de-burring, hot wash the head, dry, assemble and paint.

This procedure is best left to a qualified engineer/machinist and these instructions are offered as a guideline only!

Related Products